Sample approval

Curved Glass Samples and Mock-Up Approval

Choose the sample format based on what the project team must approve. A colour and edge comparison, a curved profile check and a full installation mock-up need different information.

Decide what the sample must demonstrate

For appearance review, specify the glass build-up, colour, coating or interlayer, finish and how the sample will be viewed. If the decision concerns the curve, glass-to-frame interface or adjoining joints, identify the geometry and scale needed to represent those features.

Set the comparison conditions

Send the approved reference where available. Record which face is viewed, the background or lighting used for comparison and which edges are exposed. Where the sample is smaller than the project pane, record which checks the sample can support and which require a larger piece or mock-up.

Document what was approved

Record the sample ID, date, drawing and schedule revisions, the approver and any conditions attached to approval. Identify whether colour, construction, curve or fit has been accepted. Ask for a review if the specified material or geometry changes after the sample is approved.

Request the sample alongside the project quote

Send the quantity range, delivery destination, drawing and proposed laminate or coating. State which decisions the sample should support and when approval is needed.

Project questions

Can a flat sample show whether a curved panel will fit the frame?

Use a flat sample for agreed appearance checks. For fit, the project team should define a representative curved sample or mock-up and its measurement references.

YOUR PROJECT, YOUR DRAWINGS

Tell us which sample your project needs

Include your application, glass build-up, approximate quantities and delivery destination. Email drawings separately and identify the revision.

WhatsApp